添加一些关于midi播放的项目
This commit is contained in:
terryLP
@@ -0,0 +1,111 @@
|
||||
#include <errno.h>
|
||||
#include <stdio.h>
|
||||
#include <sys/stat.h>
|
||||
#include <sys/unistd.h>
|
||||
#include "uart_log.h"
|
||||
|
||||
#undef errno
|
||||
extern int errno;
|
||||
|
||||
/******************************************************************************
|
||||
*
|
||||
******************************************************************************/
|
||||
|
||||
void stdio_setup(void)
|
||||
{
|
||||
// Turn off buffers, so I/O occurs immediately
|
||||
setvbuf(stdin, NULL, _IONBF, 0);
|
||||
setvbuf(stdout, NULL, _IONBF, 0);
|
||||
setvbuf(stderr, NULL, _IONBF, 0);
|
||||
}
|
||||
|
||||
/******************************************************************************
|
||||
*
|
||||
******************************************************************************/
|
||||
|
||||
int _read(int file, char *data, int len)
|
||||
{
|
||||
int bytes_read;
|
||||
|
||||
if (file != STDIN_FILENO)
|
||||
{
|
||||
errno = EBADF;
|
||||
return -1;
|
||||
}
|
||||
|
||||
for (bytes_read = 0; bytes_read < len; bytes_read++)
|
||||
{
|
||||
*data = (char) uart_getchar();
|
||||
data++;
|
||||
}
|
||||
|
||||
return bytes_read;
|
||||
}
|
||||
|
||||
/******************************************************************************
|
||||
*
|
||||
******************************************************************************/
|
||||
|
||||
int _write(int file, char *data, int len)
|
||||
{
|
||||
int bytes_written;
|
||||
|
||||
if ((file != STDOUT_FILENO) && (file != STDERR_FILENO))
|
||||
{
|
||||
errno = EBADF;
|
||||
return -1;
|
||||
}
|
||||
|
||||
for (bytes_written = 0; bytes_written < len; bytes_written++)
|
||||
{
|
||||
uart_putchar(*data);
|
||||
data++;
|
||||
}
|
||||
|
||||
return bytes_written;
|
||||
}
|
||||
|
||||
/******************************************************************************
|
||||
*
|
||||
******************************************************************************/
|
||||
|
||||
int _close(int file)
|
||||
{
|
||||
return -1;
|
||||
}
|
||||
|
||||
/******************************************************************************
|
||||
*
|
||||
******************************************************************************/
|
||||
|
||||
int _lseek(int file, int ptr, int dir)
|
||||
{
|
||||
return 0;
|
||||
}
|
||||
|
||||
/******************************************************************************
|
||||
*
|
||||
******************************************************************************/
|
||||
|
||||
int _fstat(int file, struct stat *st)
|
||||
{
|
||||
st->st_mode = S_IFCHR;
|
||||
return 0;
|
||||
}
|
||||
|
||||
/******************************************************************************
|
||||
*
|
||||
******************************************************************************/
|
||||
|
||||
int _isatty(int file)
|
||||
{
|
||||
if ((file == STDOUT_FILENO) ||
|
||||
(file == STDIN_FILENO) ||
|
||||
(file == STDERR_FILENO))
|
||||
{
|
||||
return 1;
|
||||
}
|
||||
|
||||
errno = EBADF;
|
||||
return 0;
|
||||
}
|
||||
@@ -0,0 +1,363 @@
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file hw_config.c
|
||||
* @author MCD Application Team
|
||||
* @version V4.1.0
|
||||
* @date 26-May-2017
|
||||
* @brief Hardware Configuration & Setup
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* <h2><center>© COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without modification,
|
||||
* are permitted provided that the following conditions are met:
|
||||
* 1. Redistributions of source code must retain the above copyright notice,
|
||||
* this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright notice,
|
||||
* this list of conditions and the following disclaimer in the documentation
|
||||
* and/or other materials provided with the distribution.
|
||||
* 3. Neither the name of STMicroelectronics nor the names of its contributors
|
||||
* may be used to endorse or promote products derived from this software
|
||||
* without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
||||
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
||||
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
||||
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
|
||||
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
||||
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
||||
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
|
||||
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
|
||||
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
|
||||
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
|
||||
#include "stm32_it.h"
|
||||
#include "usb_lib.h"
|
||||
#include "usb_prop.h"
|
||||
#include "usb_desc.h"
|
||||
#include "hal.h"
|
||||
#include "usb_pwr.h"
|
||||
|
||||
/* Private typedef -----------------------------------------------------------*/
|
||||
/* Private define ------------------------------------------------------------*/
|
||||
/* Private macro -------------------------------------------------------------*/
|
||||
/* Private variables ---------------------------------------------------------*/
|
||||
ErrorStatus HSEStartUpStatus;
|
||||
EXTI_InitTypeDef EXTI_InitStructure;
|
||||
extern __IO uint32_t packet_sent;
|
||||
extern __IO uint8_t Send_Buffer[MIDI_CDC_DEV_DATA_SIZE] ;
|
||||
extern __IO uint32_t packet_receive;
|
||||
extern __IO uint8_t Receive_length;
|
||||
|
||||
uint8_t Receive_Buffer[64];
|
||||
uint32_t Send_length;
|
||||
/* Extern variables ----------------------------------------------------------*/
|
||||
|
||||
extern LINE_CODING linecoding;
|
||||
|
||||
/* Private function prototypes -----------------------------------------------*/
|
||||
/* Private functions ---------------------------------------------------------*/
|
||||
/*******************************************************************************
|
||||
* Function Name : Set_System
|
||||
* Description : Configures Main system clocks & power
|
||||
* Input : None.
|
||||
* Return : None.
|
||||
*******************************************************************************/
|
||||
void Set_System(void)
|
||||
{
|
||||
GPIO_InitTypeDef GPIO_InitStructure;
|
||||
/*!< At this stage the microcontroller clock setting is already configured,
|
||||
this is done through SystemInit() function which is called from startup
|
||||
file (startup_stm32xxx.s) before to branch to application main.
|
||||
To reconfigure the default setting of SystemInit() function, refer to
|
||||
system_stm32xxx.c file
|
||||
*/
|
||||
|
||||
#if defined(STM32L1XX_MD) || defined(STM32L1XX_HD) || defined(STM32F37X) || defined(STM32F303xC) || defined(STM32F303xE) || defined(STM32F302x8)
|
||||
RCC_AHBPeriphClockCmd(RCC_AHBPeriph_GPIOA, ENABLE);
|
||||
|
||||
#else /* defined(STM32F10X_HD) || defined(STM32F10X_MD) defined(STM32F10X_XL)*/
|
||||
RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOA, ENABLE);
|
||||
#endif
|
||||
|
||||
/********************************************/
|
||||
/* Configure USB DM/DP pins */
|
||||
/********************************************/
|
||||
|
||||
#if defined(STM32L1XX_MD) || defined(STM32L1XX_HD)
|
||||
|
||||
/* Configure USB DM/DP pin. This is optional, and maintained only for user guidance.
|
||||
For the STM32L products there is no need to configure the PA12/PA11 pins couple
|
||||
as Alternate Function */
|
||||
|
||||
GPIO_InitStructure.GPIO_Pin = GPIO_Pin_11 | GPIO_Pin_12;
|
||||
GPIO_InitStructure.GPIO_Speed = GPIO_Speed_40MHz;
|
||||
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IN;
|
||||
GPIO_InitStructure.GPIO_PuPd = GPIO_PuPd_UP;
|
||||
GPIO_Init(GPIOA, &GPIO_InitStructure);
|
||||
GPIO_InitStructure.GPIO_Pin = GPIO_Pin_All;
|
||||
|
||||
#elif defined(STM32F10X_HD) || defined(STM32F10X_MD) || defined(STM32F10X_XL)
|
||||
GPIO_InitStructure.GPIO_Pin = GPIO_Pin_11 | GPIO_Pin_12;
|
||||
GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;
|
||||
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF_PP;
|
||||
GPIO_Init(GPIOA, &GPIO_InitStructure);
|
||||
|
||||
/* Enable all GPIOs Clock*/
|
||||
RCC_APB2PeriphClockCmd(RCC_APB2Periph_ALLGPIO, ENABLE);
|
||||
|
||||
#else /* defined(STM32F37X) || defined(STM32F303xC) */
|
||||
|
||||
GPIO_InitStructure.GPIO_Pin = GPIO_Pin_11 | GPIO_Pin_12;
|
||||
GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;
|
||||
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF;
|
||||
GPIO_InitStructure.GPIO_OType = GPIO_OType_PP;
|
||||
GPIO_InitStructure.GPIO_PuPd = GPIO_PuPd_NOPULL;
|
||||
GPIO_Init(GPIOA, &GPIO_InitStructure);
|
||||
|
||||
/*SET PA11,12 for USB: USB_DM,DP*/
|
||||
GPIO_PinAFConfig(GPIOA, GPIO_PinSource11, GPIO_AF_14);
|
||||
GPIO_PinAFConfig(GPIOA, GPIO_PinSource12, GPIO_AF_14);
|
||||
|
||||
#endif
|
||||
|
||||
#if ! defined(USE_NUCLEO)
|
||||
/********************************************/
|
||||
/* Enable the USB PULL UP */
|
||||
/********************************************/
|
||||
#if defined(STM32L1XX_MD) || defined(STM32L1XX_HD)
|
||||
|
||||
/* Enable integrated STM32L15xx internal pull up
|
||||
Enable the SYSCFG module clock*/
|
||||
RCC_APB2PeriphClockCmd(RCC_APB2Periph_SYSCFG, ENABLE);
|
||||
|
||||
#elif defined(STM32F10X_HD) || defined(STM32F10X_MD) || defined(STM32F10X_XL)
|
||||
|
||||
/* USB_DISCONNECT used as USB pull-up */
|
||||
GPIO_InitStructure.GPIO_Pin = USB_DISCONNECT_PIN;
|
||||
GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;
|
||||
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_Out_OD;
|
||||
GPIO_Init(USB_DISCONNECT, &GPIO_InitStructure);
|
||||
|
||||
/* Enable the USB disconnect GPIO clock */
|
||||
RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIO_DISCONNECT, ENABLE);
|
||||
|
||||
#else /* defined(STM32F37X) || defined(STM32F303xC) */
|
||||
|
||||
/* Enable the USB disconnect GPIO clock */
|
||||
RCC_AHBPeriphClockCmd(RCC_AHBPeriph_GPIO_DISCONNECT, ENABLE);
|
||||
|
||||
/* USB_DISCONNECT used as USB pull-up */
|
||||
GPIO_InitStructure.GPIO_Pin = USB_DISCONNECT_PIN;
|
||||
GPIO_InitStructure.GPIO_Speed = GPIO_Speed_2MHz;
|
||||
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_OUT;
|
||||
GPIO_InitStructure.GPIO_OType = GPIO_OType_OD;
|
||||
GPIO_InitStructure.GPIO_PuPd = GPIO_PuPd_NOPULL;
|
||||
GPIO_Init(USB_DISCONNECT, &GPIO_InitStructure);
|
||||
|
||||
#endif
|
||||
#endif /* USE_NUCLEO */
|
||||
#ifdef USB_LOW_PWR_MGMT_SUPPORT
|
||||
|
||||
/**********************************************************************/
|
||||
/* Configure the EXTI line 18 connected internally to the USB IP */
|
||||
/**********************************************************************/
|
||||
|
||||
EXTI_ClearITPendingBit(EXTI_Line18);
|
||||
EXTI_InitStructure.EXTI_Line = EXTI_Line18;
|
||||
EXTI_InitStructure.EXTI_Trigger = EXTI_Trigger_Rising;
|
||||
EXTI_InitStructure.EXTI_LineCmd = ENABLE;
|
||||
EXTI_Init(&EXTI_InitStructure);
|
||||
|
||||
#endif /* USB_LOW_PWR_MGMT_SUPPORT */
|
||||
}
|
||||
|
||||
/*******************************************************************************
|
||||
* Function Name : Set_USBClock
|
||||
* Description : Configures USB Clock input (48MHz)
|
||||
* Input : None.
|
||||
* Return : None.
|
||||
*******************************************************************************/
|
||||
void Set_USBClock(void)
|
||||
{
|
||||
#if defined(STM32L1XX_MD) || defined(STM32L1XX_HD) || defined(STM32L1XX_MD_PLUS)
|
||||
/* Enable USB clock */
|
||||
RCC_APB1PeriphClockCmd(RCC_APB1Periph_USB, ENABLE);
|
||||
|
||||
#else
|
||||
/* Select USBCLK source */
|
||||
RCC_USBCLKConfig(RCC_USBCLKSource_PLLCLK_1Div5);
|
||||
|
||||
/* Enable the USB clock */
|
||||
RCC_APB1PeriphClockCmd(RCC_APB1Periph_USB, ENABLE);
|
||||
#endif /* STM32L1XX_MD */
|
||||
}
|
||||
|
||||
/*******************************************************************************
|
||||
* Function Name : Leave_LowPowerMode
|
||||
* Description : Restores system clocks and power while exiting suspend mode
|
||||
* Input : None.
|
||||
* Return : None.
|
||||
*******************************************************************************/
|
||||
void Leave_LowPowerMode(void)
|
||||
{
|
||||
DEVICE_INFO *pInfo = &Device_Info;
|
||||
|
||||
/* Set the device state to the correct state */
|
||||
if (pInfo->Current_Configuration != 0)
|
||||
{
|
||||
/* Device configured */
|
||||
bDeviceState = CONFIGURED;
|
||||
}
|
||||
else
|
||||
{
|
||||
bDeviceState = ATTACHED;
|
||||
}
|
||||
/*Enable SystemCoreClock*/
|
||||
SystemInit();
|
||||
}
|
||||
|
||||
/*******************************************************************************
|
||||
* Function Name : USB_Interrupts_Config
|
||||
* Description : Configures the USB interrupts
|
||||
* Input : None.
|
||||
* Return : None.
|
||||
*******************************************************************************/
|
||||
void USB_Interrupts_Config(void)
|
||||
{
|
||||
NVIC_InitTypeDef NVIC_InitStructure;
|
||||
|
||||
/* 4 bits for pre-emption priority, 0 bit for subpriority */
|
||||
NVIC_PriorityGroupConfig(NVIC_PriorityGroup_4);
|
||||
|
||||
#if defined(STM32L1XX_MD)|| defined(STM32L1XX_HD) || defined(STM32L1XX_MD_PLUS)
|
||||
/* Enable the USB interrupt */
|
||||
NVIC_InitStructure.NVIC_IRQChannel = USB_LP_IRQn;
|
||||
NVIC_InitStructure.NVIC_IRQChannelPreemptionPriority = 2;
|
||||
NVIC_InitStructure.NVIC_IRQChannelSubPriority = 0;
|
||||
NVIC_InitStructure.NVIC_IRQChannelCmd = ENABLE;
|
||||
NVIC_Init(&NVIC_InitStructure);
|
||||
|
||||
/* Enable the USB Wake-up interrupt */
|
||||
NVIC_InitStructure.NVIC_IRQChannel = USB_FS_WKUP_IRQn;
|
||||
NVIC_InitStructure.NVIC_IRQChannelPreemptionPriority = 1;
|
||||
NVIC_InitStructure.NVIC_IRQChannelCmd = ENABLE;
|
||||
NVIC_Init(&NVIC_InitStructure);
|
||||
|
||||
#elif defined(STM32F37X)
|
||||
/* Enable the USB interrupt */
|
||||
NVIC_InitStructure.NVIC_IRQChannel = USB_LP_IRQn;
|
||||
NVIC_InitStructure.NVIC_IRQChannelPreemptionPriority = 2;
|
||||
NVIC_InitStructure.NVIC_IRQChannelSubPriority = 0;
|
||||
NVIC_InitStructure.NVIC_IRQChannelCmd = ENABLE;
|
||||
NVIC_Init(&NVIC_InitStructure);
|
||||
|
||||
/* Enable the USB Wake-up interrupt */
|
||||
NVIC_InitStructure.NVIC_IRQChannel = USBWakeUp_IRQn;
|
||||
NVIC_InitStructure.NVIC_IRQChannelPreemptionPriority = 1;
|
||||
NVIC_InitStructure.NVIC_IRQChannelCmd = ENABLE;
|
||||
NVIC_Init(&NVIC_InitStructure);
|
||||
|
||||
#else
|
||||
/* Enable the USB interrupt */
|
||||
NVIC_InitStructure.NVIC_IRQChannel = USB_LP_CAN1_RX0_IRQn;
|
||||
NVIC_InitStructure.NVIC_IRQChannelPreemptionPriority = 2;
|
||||
NVIC_InitStructure.NVIC_IRQChannelSubPriority = 0;
|
||||
NVIC_InitStructure.NVIC_IRQChannelCmd = ENABLE;
|
||||
NVIC_Init(&NVIC_InitStructure);
|
||||
|
||||
/* Enable the USB Wake-up interrupt */
|
||||
NVIC_InitStructure.NVIC_IRQChannel = USBWakeUp_IRQn;
|
||||
NVIC_InitStructure.NVIC_IRQChannelPreemptionPriority = 1;
|
||||
NVIC_Init(&NVIC_InitStructure);
|
||||
#endif
|
||||
}
|
||||
|
||||
/*******************************************************************************
|
||||
* Function Name : USB_Cable_Config
|
||||
* Description : Software Connection/Disconnection of USB Cable
|
||||
* Input : None.
|
||||
* Return : Status
|
||||
*******************************************************************************/
|
||||
void USB_Cable_Config (FunctionalState NewState)
|
||||
{
|
||||
if (NewState != DISABLE)
|
||||
{
|
||||
GPIO_ResetBits(USB_DISCONNECT, USB_DISCONNECT_PIN);
|
||||
}
|
||||
else
|
||||
{
|
||||
GPIO_SetBits(USB_DISCONNECT, USB_DISCONNECT_PIN);
|
||||
}
|
||||
}
|
||||
|
||||
/*******************************************************************************
|
||||
* Function Name : HAL_GetHwSerialNum.
|
||||
* Description : Create the serial number string descriptor.
|
||||
* Input : None.
|
||||
* Output : None.
|
||||
* Return : None.
|
||||
*******************************************************************************/
|
||||
uint64_t HAL_GetHwSerialNum(void)
|
||||
{
|
||||
uint32_t Device_Serial0, Device_Serial1, Device_Serial2;
|
||||
|
||||
Device_Serial0 = *(uint32_t*)ID1;
|
||||
Device_Serial1 = *(uint32_t*)ID2;
|
||||
Device_Serial2 = *(uint32_t*)ID3;
|
||||
|
||||
Device_Serial0 += Device_Serial2;
|
||||
return (uint64_t)Device_Serial0|((uint64_t)Device_Serial1<<32);
|
||||
}
|
||||
|
||||
|
||||
|
||||
/*******************************************************************************
|
||||
* Function Name : Send DATA .
|
||||
* Description : send the data received from the STM32 to the PC through USB
|
||||
* Input : None.
|
||||
* Output : None.
|
||||
* Return : None.
|
||||
*******************************************************************************/
|
||||
uint32_t CDC_Send_DATA (uint8_t *ptrBuffer, uint8_t Send_length)
|
||||
{
|
||||
/*if max buffer is Not reached*/
|
||||
if(Send_length < MIDI_CDC_DEV_DATA_SIZE)
|
||||
{
|
||||
/*Sent flag*/
|
||||
packet_sent = 0;
|
||||
/* send packet to PMA*/
|
||||
UserToPMABufferCopy((unsigned char*)ptrBuffer, ENDP1_TXADDR, Send_length);
|
||||
SetEPTxCount(ENDP1, Send_length);
|
||||
SetEPTxValid(ENDP1);
|
||||
}
|
||||
else
|
||||
{
|
||||
return 0;
|
||||
}
|
||||
return 1;
|
||||
}
|
||||
|
||||
/*******************************************************************************
|
||||
* Function Name : Receive DATA .
|
||||
* Description : receive the data from the PC to STM32 and send it through USB
|
||||
* Input : None.
|
||||
* Output : None.
|
||||
* Return : None.
|
||||
*******************************************************************************/
|
||||
uint32_t CDC_Receive_DATA(void)
|
||||
{
|
||||
/*Receive flag*/
|
||||
packet_receive = 0;
|
||||
SetEPRxValid(ENDP3);
|
||||
SetEPRxValid(ENDP4);
|
||||
return 1 ;
|
||||
}
|
||||
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||||
@@ -0,0 +1,85 @@
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file hw_config.h
|
||||
* @author MCD Application Team
|
||||
* @version V4.1.0
|
||||
* @date 26-May-2017
|
||||
* @brief Hardware Configuration & Setup
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* <h2><center>© COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without modification,
|
||||
* are permitted provided that the following conditions are met:
|
||||
* 1. Redistributions of source code must retain the above copyright notice,
|
||||
* this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright notice,
|
||||
* this list of conditions and the following disclaimer in the documentation
|
||||
* and/or other materials provided with the distribution.
|
||||
* 3. Neither the name of STMicroelectronics nor the names of its contributors
|
||||
* may be used to endorse or promote products derived from this software
|
||||
* without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
||||
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
||||
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
||||
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
|
||||
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
||||
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
||||
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
|
||||
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
|
||||
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
|
||||
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
|
||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||
#ifndef __HAL_H
|
||||
#define __HAL_H
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "stm32f10x.h"
|
||||
#include "usb_type.h"
|
||||
|
||||
/* Exported types ------------------------------------------------------------*/
|
||||
/* Exported constants --------------------------------------------------------*/
|
||||
/* Exported macro ------------------------------------------------------------*/
|
||||
/* Exported define -----------------------------------------------------------*/
|
||||
#define LED_ON 0xF0
|
||||
#define LED_OFF 0xFF
|
||||
|
||||
/*Unique Devices IDs register set*/
|
||||
|
||||
#define ID1 (0x1FFFF7E8)
|
||||
#define ID2 (0x1FFFF7EC)
|
||||
#define ID3 (0x1FFFF7F0)
|
||||
|
||||
|
||||
|
||||
/* Define the STM32F10x hardware depending on the used evaluation board */
|
||||
#define USB_DISCONNECT GPIOB
|
||||
#define USB_DISCONNECT_PIN GPIO_Pin_5
|
||||
#define RCC_APB2Periph_GPIO_DISCONNECT RCC_APB2Periph_GPIOB
|
||||
#define RCC_APB2Periph_ALLGPIO (RCC_APB2Periph_GPIOA \
|
||||
| RCC_APB2Periph_GPIOB \
|
||||
| RCC_APB2Periph_GPIOC \
|
||||
| RCC_APB2Periph_GPIOD \
|
||||
| RCC_APB2Periph_GPIOE )
|
||||
|
||||
/* Exported functions ------------------------------------------------------- */
|
||||
void Set_System(void);
|
||||
void Set_USBClock(void);
|
||||
void Enter_LowPowerMode(void);
|
||||
void Leave_LowPowerMode(void);
|
||||
void USB_Interrupts_Config(void);
|
||||
void USB_Cable_Config (FunctionalState NewState);
|
||||
uint64_t HAL_GetHwSerialNum(void);
|
||||
uint32_t CDC_Send_DATA (uint8_t *ptrBuffer, uint8_t Send_length);
|
||||
uint32_t CDC_Receive_DATA(void);
|
||||
/* External variables --------------------------------------------------------*/
|
||||
|
||||
#endif /*__HW_CONFIG_H*/
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||||
@@ -0,0 +1,47 @@
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file hw_config.h
|
||||
* @author MCD Application Team
|
||||
* @version V4.1.0
|
||||
* @date 26-May-2017
|
||||
* @brief Hardware Configuration & Setup
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* <h2><center>© COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without modification,
|
||||
* are permitted provided that the following conditions are met:
|
||||
* 1. Redistributions of source code must retain the above copyright notice,
|
||||
* this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright notice,
|
||||
* this list of conditions and the following disclaimer in the documentation
|
||||
* and/or other materials provided with the distribution.
|
||||
* 3. Neither the name of STMicroelectronics nor the names of its contributors
|
||||
* may be used to endorse or promote products derived from this software
|
||||
* without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
||||
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
||||
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
||||
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
|
||||
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
||||
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
||||
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
|
||||
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
|
||||
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
|
||||
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
|
||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||
#ifndef __HW_CONFIG_H
|
||||
#define __HW_CONFIG_H
|
||||
#include "stm32f10x.h"
|
||||
#include "usb_type.h"
|
||||
/*Dummy header merely because of the st usb lib require it.*/
|
||||
|
||||
#endif /*__HW_CONFIG_H*/
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||||
@@ -0,0 +1,221 @@
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file stm32_it.c
|
||||
* @author MCD Application Team
|
||||
* @version V4.1.0
|
||||
* @date 26-May-2017
|
||||
* @brief Main Interrupt Service Routines.
|
||||
* This file provides template for all exceptions handler and peripherals
|
||||
* interrupt service routine.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* <h2><center>© COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without modification,
|
||||
* are permitted provided that the following conditions are met:
|
||||
* 1. Redistributions of source code must retain the above copyright notice,
|
||||
* this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright notice,
|
||||
* this list of conditions and the following disclaimer in the documentation
|
||||
* and/or other materials provided with the distribution.
|
||||
* 3. Neither the name of STMicroelectronics nor the names of its contributors
|
||||
* may be used to endorse or promote products derived from this software
|
||||
* without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
||||
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
||||
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
||||
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
|
||||
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
||||
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
||||
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
|
||||
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
|
||||
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
|
||||
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "hal.h"
|
||||
#include "stm32_it.h"
|
||||
#include "usb_lib.h"
|
||||
#include "usb_istr.h"
|
||||
|
||||
/* Private typedef -----------------------------------------------------------*/
|
||||
/* Private define ------------------------------------------------------------*/
|
||||
/* Private macro -------------------------------------------------------------*/
|
||||
/* Private variables ---------------------------------------------------------*/
|
||||
/* Private function prototypes -----------------------------------------------*/
|
||||
/* Private functions ---------------------------------------------------------*/
|
||||
/******************************************************************************/
|
||||
/* Cortex-M Processor Exceptions Handlers */
|
||||
/******************************************************************************/
|
||||
|
||||
/*******************************************************************************
|
||||
* Function Name : NMI_Handler
|
||||
* Description : This function handles NMI exception.
|
||||
* Input : None
|
||||
* Output : None
|
||||
* Return : None
|
||||
*******************************************************************************/
|
||||
void NMI_Handler(void)
|
||||
{
|
||||
}
|
||||
|
||||
/*******************************************************************************
|
||||
* Function Name : HardFault_Handler
|
||||
* Description : This function handles Hard Fault exception.
|
||||
* Input : None
|
||||
* Output : None
|
||||
* Return : None
|
||||
*******************************************************************************/
|
||||
void HardFault_Handler(void)
|
||||
{
|
||||
/* Go to infinite loop when Hard Fault exception occurs */
|
||||
while (1)
|
||||
{
|
||||
}
|
||||
}
|
||||
|
||||
/*******************************************************************************
|
||||
* Function Name : MemManage_Handler
|
||||
* Description : This function handles Memory Manage exception.
|
||||
* Input : None
|
||||
* Output : None
|
||||
* Return : None
|
||||
*******************************************************************************/
|
||||
void MemManage_Handler(void)
|
||||
{
|
||||
/* Go to infinite loop when Memory Manage exception occurs */
|
||||
while (1)
|
||||
{
|
||||
}
|
||||
}
|
||||
|
||||
/*******************************************************************************
|
||||
* Function Name : BusFault_Handler
|
||||
* Description : This function handles Bus Fault exception.
|
||||
* Input : None
|
||||
* Output : None
|
||||
* Return : None
|
||||
*******************************************************************************/
|
||||
void BusFault_Handler(void)
|
||||
{
|
||||
/* Go to infinite loop when Bus Fault exception occurs */
|
||||
while (1)
|
||||
{
|
||||
}
|
||||
}
|
||||
|
||||
/*******************************************************************************
|
||||
* Function Name : UsageFault_Handler
|
||||
* Description : This function handles Usage Fault exception.
|
||||
* Input : None
|
||||
* Output : None
|
||||
* Return : None
|
||||
*******************************************************************************/
|
||||
void UsageFault_Handler(void)
|
||||
{
|
||||
/* Go to infinite loop when Usage Fault exception occurs */
|
||||
while (1)
|
||||
{
|
||||
}
|
||||
}
|
||||
|
||||
/*******************************************************************************
|
||||
* Function Name : SVC_Handler
|
||||
* Description : This function handles SVCall exception.
|
||||
* Input : None
|
||||
* Output : None
|
||||
* Return : None
|
||||
*******************************************************************************/
|
||||
// void SVC_Handler(void)
|
||||
// {
|
||||
// }
|
||||
|
||||
/*******************************************************************************
|
||||
* Function Name : DebugMon_Handler
|
||||
* Description : This function handles Debug Monitor exception.
|
||||
* Input : None
|
||||
* Output : None
|
||||
* Return : None
|
||||
*******************************************************************************/
|
||||
void DebugMon_Handler(void)
|
||||
{
|
||||
}
|
||||
|
||||
/*******************************************************************************
|
||||
* Function Name : PendSV_Handler
|
||||
* Description : This function handles PendSVC exception.
|
||||
* Input : None
|
||||
* Output : None
|
||||
* Return : None
|
||||
*******************************************************************************/
|
||||
// void PendSV_Handler(void)
|
||||
// {
|
||||
// }
|
||||
|
||||
/*******************************************************************************
|
||||
* Function Name : SysTick_Handler
|
||||
* Description : This function handles SysTick Handler.
|
||||
* Input : None
|
||||
* Output : None
|
||||
* Return : None
|
||||
*******************************************************************************/
|
||||
|
||||
/*******************************************************************************
|
||||
* Function Name : USB_IRQHandler
|
||||
* Description : This function handles USB Low Priority interrupts
|
||||
* requests.
|
||||
* Input : None
|
||||
* Output : None
|
||||
* Return : None
|
||||
*******************************************************************************/
|
||||
#if defined(STM32L1XX_MD) || defined(STM32L1XX_HD)|| defined(STM32L1XX_MD_PLUS)|| defined (STM32F37X)
|
||||
void USB_LP_IRQHandler(void)
|
||||
#else
|
||||
void USB_LP_CAN1_RX0_IRQHandler(void)
|
||||
#endif
|
||||
{
|
||||
USB_Istr();
|
||||
}
|
||||
|
||||
/*******************************************************************************
|
||||
* Function Name : USB_FS_WKUP_IRQHandler
|
||||
* Description : This function handles USB WakeUp interrupt request.
|
||||
* Input : None
|
||||
* Output : None
|
||||
* Return : None
|
||||
*******************************************************************************/
|
||||
|
||||
#if defined(STM32L1XX_MD) || defined(STM32L1XX_HD)|| defined(STM32L1XX_MD_PLUS)
|
||||
void USB_FS_WKUP_IRQHandler(void)
|
||||
#else
|
||||
void USBWakeUp_IRQHandler(void)
|
||||
#endif
|
||||
{
|
||||
EXTI_ClearITPendingBit(EXTI_Line18);
|
||||
}
|
||||
|
||||
/******************************************************************************/
|
||||
/* STM32 Peripherals Interrupt Handlers */
|
||||
/* Add here the Interrupt Handler for the used peripheral(s) (PPP), for the */
|
||||
/* available peripheral interrupt handler's name please refer to the startup */
|
||||
/* file (startup_stm32xxx.s). */
|
||||
/******************************************************************************/
|
||||
|
||||
/*******************************************************************************
|
||||
* Function Name : PPP_IRQHandler
|
||||
* Description : This function handles PPP interrupt request.
|
||||
* Input : None
|
||||
* Output : None
|
||||
* Return : None
|
||||
*******************************************************************************/
|
||||
/*void PPP_IRQHandler(void)
|
||||
{
|
||||
}*/
|
||||
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||||
|
||||
@@ -0,0 +1,64 @@
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file stm32_it.h
|
||||
* @author MCD Application Team
|
||||
* @version V4.1.0
|
||||
* @date 26-May-2017
|
||||
* @brief This file contains the headers of the interrupt handlers.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* <h2><center>© COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without modification,
|
||||
* are permitted provided that the following conditions are met:
|
||||
* 1. Redistributions of source code must retain the above copyright notice,
|
||||
* this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright notice,
|
||||
* this list of conditions and the following disclaimer in the documentation
|
||||
* and/or other materials provided with the distribution.
|
||||
* 3. Neither the name of STMicroelectronics nor the names of its contributors
|
||||
* may be used to endorse or promote products derived from this software
|
||||
* without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
||||
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
||||
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
||||
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
|
||||
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
||||
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
||||
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
|
||||
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
|
||||
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
|
||||
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
|
||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||
#ifndef __STM32_IT_H
|
||||
#define __STM32_IT_H
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
|
||||
/* Exported types ------------------------------------------------------------*/
|
||||
/* Exported constants --------------------------------------------------------*/
|
||||
/* Exported macro ------------------------------------------------------------*/
|
||||
/* Exported functions ------------------------------------------------------- */
|
||||
|
||||
void NMI_Handler(void);
|
||||
void HardFault_Handler(void);
|
||||
void MemManage_Handler(void);
|
||||
void BusFault_Handler(void);
|
||||
void UsageFault_Handler(void);
|
||||
void SVC_Handler(void);
|
||||
void DebugMon_Handler(void);
|
||||
void PendSV_Handler(void);
|
||||
void SysTick_Handler(void);
|
||||
void USBWakeUp_IRQHandler(void);
|
||||
void USB_FS_WKUP_IRQHandler(void);
|
||||
|
||||
#endif /* __STM32_IT_H */
|
||||
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||||
@@ -0,0 +1,253 @@
|
||||
//
|
||||
// Created by YangYongbao on 2017/3/18.
|
||||
//
|
||||
|
||||
#include "uart_log.h"
|
||||
#include "stm32f10x.h"
|
||||
#include "stm32f10x_conf.h"
|
||||
|
||||
void uart_log_init(void)
|
||||
{
|
||||
GPIO_InitTypeDef GPIO_InitStructure;
|
||||
USART_InitTypeDef USART_InitStructure;
|
||||
|
||||
RCC_APB2PeriphClockCmd( RCC_APB2Periph_GPIOA, ENABLE);
|
||||
RCC_APB1PeriphClockCmd( RCC_APB1Periph_USART2, ENABLE);
|
||||
|
||||
/* USART2 GPIO config */
|
||||
/* Configure USART2 Tx (PA2) as alternate function push-pull */
|
||||
GPIO_InitStructure.GPIO_Pin = GPIO_Pin_2;
|
||||
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF_PP;
|
||||
GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;
|
||||
GPIO_Init(GPIOA, &GPIO_InitStructure);
|
||||
|
||||
/* Configure USART2 Rx (PA3) as input floating */
|
||||
GPIO_InitStructure.GPIO_Pin = GPIO_Pin_3;
|
||||
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IN_FLOATING;
|
||||
GPIO_Init(GPIOA, &GPIO_InitStructure);
|
||||
|
||||
/* USART2 mode config */
|
||||
USART_InitStructure.USART_BaudRate = 115200;
|
||||
USART_InitStructure.USART_WordLength = USART_WordLength_8b;
|
||||
USART_InitStructure.USART_StopBits = USART_StopBits_1;
|
||||
USART_InitStructure.USART_Parity = USART_Parity_No ;
|
||||
USART_InitStructure.USART_HardwareFlowControl = USART_HardwareFlowControl_None;
|
||||
USART_InitStructure.USART_Mode = USART_Mode_Rx | USART_Mode_Tx;
|
||||
USART_Init(USART2, &USART_InitStructure);
|
||||
USART_ITConfig(USART2, USART_IT_RXNE, ENABLE);
|
||||
|
||||
USART_Cmd(USART2, ENABLE);
|
||||
}
|
||||
void uart_putchar(unsigned int c)
|
||||
{
|
||||
while (USART_GetFlagStatus(USART2, USART_FLAG_TXE) == RESET);
|
||||
USART_SendData(USART2, (uint16_t)c);
|
||||
}
|
||||
|
||||
int uart_getchar(void)
|
||||
{
|
||||
return 0;
|
||||
}
|
||||
|
||||
static void printchar(char **str, unsigned int c)
|
||||
{
|
||||
while (USART_GetFlagStatus(USART2, USART_FLAG_TXE) == RESET);
|
||||
USART_SendData(USART2, (uint16_t)c);
|
||||
}
|
||||
|
||||
#ifdef USE_CUSTOM_PRINTF
|
||||
#define PAD_RIGHT 1
|
||||
#define PAD_ZERO 2
|
||||
|
||||
static int prints(char **out, const char *string, int width, int pad)
|
||||
{
|
||||
register int pc = 0, padchar = ' ';
|
||||
|
||||
if (width > 0) {
|
||||
register int len = 0;
|
||||
register const char *ptr;
|
||||
for (ptr = string; *ptr; ++ptr) ++len;
|
||||
if (len >= width) width = 0;
|
||||
else width -= len;
|
||||
if (pad & PAD_ZERO) padchar = '0';
|
||||
}
|
||||
if (!(pad & PAD_RIGHT)) {
|
||||
for ( ; width > 0; --width) {
|
||||
printchar (out, padchar);
|
||||
++pc;
|
||||
}
|
||||
}
|
||||
for ( ; *string ; ++string) {
|
||||
printchar (out, *string);
|
||||
++pc;
|
||||
}
|
||||
for ( ; width > 0; --width) {
|
||||
printchar (out, padchar);
|
||||
++pc;
|
||||
}
|
||||
|
||||
return pc;
|
||||
}
|
||||
|
||||
/* the following should be enough for 32 bit int */
|
||||
#define PRINT_BUF_LEN 12
|
||||
|
||||
static int printi(char **out, int i, int b, int sg, int width, int pad, int letbase)
|
||||
{
|
||||
char print_buf[PRINT_BUF_LEN];
|
||||
register char *s;
|
||||
register int t, neg = 0, pc = 0;
|
||||
register unsigned int u = i;
|
||||
|
||||
if (i == 0) {
|
||||
print_buf[0] = '0';
|
||||
print_buf[1] = '\0';
|
||||
return prints (out, print_buf, width, pad);
|
||||
}
|
||||
|
||||
if (sg && b == 10 && i < 0) {
|
||||
neg = 1;
|
||||
u = -i;
|
||||
}
|
||||
|
||||
s = print_buf + PRINT_BUF_LEN-1;
|
||||
*s = '\0';
|
||||
|
||||
while (u) {
|
||||
t = u % b;
|
||||
if( t >= 10 )
|
||||
t += letbase - '0' - 10;
|
||||
*--s = t + '0';
|
||||
u /= b;
|
||||
}
|
||||
|
||||
if (neg) {
|
||||
if( width && (pad & PAD_ZERO) ) {
|
||||
printchar (out, '-');
|
||||
++pc;
|
||||
--width;
|
||||
}
|
||||
else {
|
||||
*--s = '-';
|
||||
}
|
||||
}
|
||||
|
||||
return pc + prints (out, s, width, pad);
|
||||
}
|
||||
|
||||
static int print( char **out, const char *format, va_list args )
|
||||
{
|
||||
register int width, pad;
|
||||
register int pc = 0;
|
||||
char scr[2];
|
||||
|
||||
for (; *format != 0; ++format) {
|
||||
if (*format == '%') {
|
||||
++format;
|
||||
width = pad = 0;
|
||||
if (*format == '\0') break;
|
||||
if (*format == '%') goto out;
|
||||
if (*format == '-') {
|
||||
++format;
|
||||
pad = PAD_RIGHT;
|
||||
}
|
||||
while (*format == '0') {
|
||||
++format;
|
||||
pad |= PAD_ZERO;
|
||||
}
|
||||
for ( ; *format >= '0' && *format <= '9'; ++format) {
|
||||
width *= 10;
|
||||
width += *format - '0';
|
||||
}
|
||||
if( *format == 's' ) {
|
||||
register char *s = (char *)va_arg( args, int );
|
||||
pc += prints (out, s?s:"(null)", width, pad);
|
||||
continue;
|
||||
}
|
||||
if( *format == 'd' ) {
|
||||
pc += printi (out, va_arg( args, int ), 10, 1, width, pad, 'a');
|
||||
continue;
|
||||
}
|
||||
if( *format == 'x' ) {
|
||||
pc += printi (out, va_arg( args, int ), 16, 0, width, pad, 'a');
|
||||
continue;
|
||||
}
|
||||
if( *format == 'X' ) {
|
||||
pc += printi (out, va_arg( args, int ), 16, 0, width, pad, 'A');
|
||||
continue;
|
||||
}
|
||||
if( *format == 'u' ) {
|
||||
pc += printi (out, va_arg( args, int ), 10, 0, width, pad, 'a');
|
||||
continue;
|
||||
}
|
||||
if( *format == 'c' ) {
|
||||
/* char are converted to int then pushed on the stack */
|
||||
scr[0] = (char)va_arg( args, int );
|
||||
scr[1] = '\0';
|
||||
pc += prints (out, scr, width, pad);
|
||||
continue;
|
||||
}
|
||||
}
|
||||
else {
|
||||
out:
|
||||
printchar (out, *format);
|
||||
++pc;
|
||||
}
|
||||
}
|
||||
if (out) **out = '\0';
|
||||
va_end( args );
|
||||
return pc;
|
||||
}
|
||||
|
||||
int printf(const char *format, ...)
|
||||
{
|
||||
va_list args;
|
||||
|
||||
va_start( args, format );
|
||||
return print( 0, format, args );
|
||||
}
|
||||
|
||||
void debug(const char *format, ...)
|
||||
{
|
||||
va_list args;
|
||||
|
||||
va_start( args, format );
|
||||
print( 0, format, args );
|
||||
print(0, "\n", args);
|
||||
}
|
||||
|
||||
int sprintf(char *out, const char *format, ...)
|
||||
{
|
||||
va_list args;
|
||||
|
||||
va_start( args, format );
|
||||
return print( &out, format, args );
|
||||
}
|
||||
|
||||
int snprintf( char *buf, unsigned int count, const char *format, ... )
|
||||
{
|
||||
va_list args;
|
||||
|
||||
( void ) count;
|
||||
|
||||
va_start( args, format );
|
||||
return print( &buf, format, args );
|
||||
}
|
||||
#endif
|
||||
|
||||
// UART2 interrupt
|
||||
void USART2_IRQHandler(void)
|
||||
{
|
||||
uint8_t data;
|
||||
if (USART_GetITStatus(USART2, USART_IT_RXNE) != RESET)
|
||||
{
|
||||
data = USART_ReceiveData(USART2);
|
||||
// add usart receive here
|
||||
// uart_receive_input(data);
|
||||
|
||||
USART_ClearFlag(USART2, USART_FLAG_RXNE);
|
||||
USART_ClearITPendingBit(USART2, USART_IT_RXNE);
|
||||
}
|
||||
}
|
||||
|
||||
|
||||
@@ -0,0 +1,21 @@
|
||||
//
|
||||
// Created by YangYongbao on 2017/3/18.
|
||||
//
|
||||
|
||||
#ifndef STM32F10X_MAKEFILE_FREERTOS_UART_LOG_H
|
||||
#define STM32F10X_MAKEFILE_FREERTOS_UART_LOG_H
|
||||
|
||||
#include <stdarg.h>
|
||||
#include <stdio.h>
|
||||
|
||||
|
||||
void uart_log_init(void);
|
||||
void uart_putchar(unsigned int c);
|
||||
int uart_getchar(void);
|
||||
#ifdef USE_CUSTOM_PRINTF
|
||||
void debug(const char *format, ...);
|
||||
#else
|
||||
#define debug(f_, ...) printf((f_), ##__VA_ARGS__)
|
||||
#endif
|
||||
|
||||
#endif //STM32F10X_MAKEFILE_FREERTOS_UART_LOG_H
|
||||
Reference in New Issue
Block a user