添加一些关于midi播放的项目
This commit is contained in:
terryLP
@@ -0,0 +1,437 @@
|
||||
/*************************************************************************!
|
||||
* 技术讨论：QQ群 123763203
|
||||
* 官网 ：www.navota.com
|
||||
*
|
||||
* @file uart.c
|
||||
* @brief uart通讯接口函数库
|
||||
* @author Navota
|
||||
* @date 2017-1-1
|
||||
*************************************************************************/
|
||||
#include "uart.h"
|
||||
|
||||
|
||||
/*!
|
||||
* @brief 存放回调入口
|
||||
*
|
||||
*/
|
||||
UART_CallbackType UART_Callback = NULL;
|
||||
|
||||
/******************************************************************************
|
||||
* 定义UART的接口函数
|
||||
*******************************************************************************/
|
||||
|
||||
/*****************************************************************************//*!
|
||||
*
|
||||
* @brief 初始化UART,关中断,无硬件流控制.
|
||||
*
|
||||
* @param[in] pUART 指向三个UART其中一个的基址
|
||||
* @param[in] pConfig 配置UART的结构体
|
||||
*
|
||||
* @return none
|
||||
*
|
||||
*****************************************************************************/
|
||||
void UART_Init(UART_Type *pUART, UART_ConfigType *pConfig)
|
||||
{
|
||||
uint16_t u16Sbr;
|
||||
uint8_t u8Temp;
|
||||
uint32_t u32SysClk = pConfig->u32SysClkHz;//定义系统时钟
|
||||
uint32_t u32Baud = pConfig->u32Baudrate;//定义波特率
|
||||
|
||||
/* 合法性检查 */
|
||||
ASSERT((pUART == UART0) || (pUART == UART1) || (pUART == UART2));
|
||||
|
||||
/* 设置时钟选通控制用来选择相应的 UART 口 */
|
||||
if (pUART == UART0)
|
||||
{
|
||||
SIM->SCGC |= SIM_SCGC_UART0_MASK;//使能相应功能位， 选通对应 UART
|
||||
}
|
||||
#if defined(CPU_NV32)
|
||||
else if (pUART == UART1)
|
||||
{
|
||||
SIM->SCGC |= SIM_SCGC_UART1_MASK;
|
||||
}
|
||||
else
|
||||
{
|
||||
SIM->SCGC |= SIM_SCGC_UART2_MASK;
|
||||
}
|
||||
#endif
|
||||
/*确保在我们进行配置时， 禁止发送和接收*/
|
||||
pUART->C2 &= ~(UART_C2_TE_MASK | UART_C2_RE_MASK );
|
||||
|
||||
/* 配置 UART 为 8 位模式, 无奇偶校验位 */
|
||||
pUART->C1 = 0;
|
||||
|
||||
/* 波特率计算 */
|
||||
u16Sbr = (((u32SysClk)>>4) + (u32Baud>>1))/u32Baud;
|
||||
|
||||
/*把当前数据存放在串口波特率寄存器中， 且SBR位清0，即波特率发生器被禁止*/
|
||||
u8Temp = pUART->BDH & ~(UART_BDH_SBR_MASK);
|
||||
|
||||
pUART->BDH = u8Temp | UART_BDH_SBR(u16Sbr >> 8);
|
||||
pUART->BDL = (uint8_t)(u16Sbr & UART_BDL_SBR_MASK);
|
||||
|
||||
/*使能 UART 接收和发送 */
|
||||
pUART->C2 |= (UART_C2_TE_MASK | UART_C2_RE_MASK );
|
||||
}
|
||||
|
||||
/*****************************************************************************//*!
|
||||
*
|
||||
* @brief 接收一个字符.
|
||||
*
|
||||
* @param[in] pUART 指向三个UART其中一个的基址
|
||||
*
|
||||
* @return 接收到的字符
|
||||
*
|
||||
*****************************************************************************/
|
||||
uint8_t UART_GetChar(UART_Type *pUART)
|
||||
{
|
||||
|
||||
/* 合法性检测 */
|
||||
ASSERT((pUART == UART0) || (pUART == UART1) || (pUART == UART2));
|
||||
|
||||
/* 等待直到一个字符被接收 */
|
||||
while (!(pUART->S1 & UART_S1_RDRF_MASK));
|
||||
|
||||
/* 返回接收到的8位数据 */
|
||||
return pUART->D;
|
||||
}
|
||||
/*****************************************************************************//*!
|
||||
*
|
||||
* @brief 发送一个字符.
|
||||
*
|
||||
* @param[in] pUART 指向三个UART其中一个的基址
|
||||
* @param[in] u8Char 要发送的字符
|
||||
*
|
||||
* @return none
|
||||
*
|
||||
*****************************************************************************/
|
||||
void UART_PutChar(UART_Type *pUART, uint8_t u8Char)
|
||||
{
|
||||
/* 一直等待， 直到缓冲区为空 */
|
||||
while (!(pUART->S1 & UART_S1_TDRE_MASK));
|
||||
|
||||
/* 发送字符到数据寄存器 */
|
||||
pUART->D = (uint8_t)u8Char;
|
||||
}
|
||||
|
||||
/*****************************************************************************//*!
|
||||
*
|
||||
* @brief 波特率设置.
|
||||
*
|
||||
* @param[in] pUART 指向三个UART其中一个的基址
|
||||
* @param[in] pConfig 波特率相关配置结构体
|
||||
*
|
||||
* @return none
|
||||
*
|
||||
*****************************************************************************/
|
||||
void UART_SetBaudrate(UART_Type *pUART, UART_ConfigBaudrateType *pConfig)
|
||||
{
|
||||
uint8_t u8Temp;
|
||||
uint16_t u16Sbr;
|
||||
uint32_t u32SysClk = pConfig->u32SysClkHz;
|
||||
uint32_t u32baud = pConfig->u32Baudrate;
|
||||
|
||||
/* 合法性检测 */
|
||||
ASSERT((pUART == UART0) || (pUART == UART1) || (pUART == UART2));
|
||||
|
||||
/*计算波特率，四舍五入提高精度 */
|
||||
u16Sbr = (((u32SysClk)>>4) + (u32baud>>1))/u32baud;
|
||||
|
||||
|
||||
u8Temp = pUART->BDH & ~(UART_BDH_SBR_MASK);
|
||||
|
||||
pUART->BDH = u8Temp | UART_BDH_SBR(u16Sbr >> 8);
|
||||
pUART->BDL = (uint8_t)(u16Sbr & UART_BDL_SBR_MASK);
|
||||
|
||||
|
||||
pUART->C2 |= (UART_C2_TE_MASK | UART_C2_RE_MASK );
|
||||
|
||||
}
|
||||
|
||||
/*****************************************************************************//*!
|
||||
*
|
||||
* @brief 使能UART中断.
|
||||
*
|
||||
* @param[in] pUART 指向三个UART其中一个的基址
|
||||
* @param[in] InterruptType 中断的类型
|
||||
*
|
||||
* @return none
|
||||
*
|
||||
*****************************************************************************/
|
||||
void UART_EnableInterrupt(UART_Type *pUART, UART_InterruptType InterruptType)
|
||||
{
|
||||
|
||||
/* 通道合法性检查 */
|
||||
ASSERT((pUART == UART0) || (pUART == UART1) || (pUART == UART2));
|
||||
|
||||
if (InterruptType == UART_TxBuffEmptyInt) //发送中断使能
|
||||
{
|
||||
pUART->C2 |= UART_C2_TIE_MASK;
|
||||
}
|
||||
else if (InterruptType == UART_TxCompleteInt) //传输完成中断使能
|
||||
{
|
||||
pUART->C2 |= UART_C2_TCIE_MASK;
|
||||
}
|
||||
else if (InterruptType == UART_RxBuffFullInt) //接收器中断使能
|
||||
{
|
||||
pUART->C2 |= UART_C2_RIE_MASK;
|
||||
}
|
||||
else if (InterruptType == UART_IdleLineInt) //空闲线中断使能
|
||||
{
|
||||
pUART->C2 |= UART_C2_ILIE_MASK;
|
||||
}
|
||||
else if (InterruptType == UART_RxOverrunInt) //过载中断使能
|
||||
{
|
||||
pUART->C3 |= UART_C3_ORIE_MASK;
|
||||
}
|
||||
else if (InterruptType == UART_NoiseErrorInt) //噪声错误中断使能
|
||||
{
|
||||
pUART->C3 |= UART_C3_NEIE_MASK;
|
||||
}
|
||||
else if (InterruptType == UART_FramingErrorInt) //帧错误中断使能
|
||||
{
|
||||
pUART->C3 |= UART_C3_FEIE_MASK;
|
||||
}
|
||||
else if (InterruptType == UART_ParityErrorInt) //奇偶校验中断使能
|
||||
{
|
||||
pUART->C3 |= UART_C3_FEIE_MASK;
|
||||
}
|
||||
else
|
||||
{
|
||||
//其他暂不支持类型的中断
|
||||
}
|
||||
}
|
||||
|
||||
/*****************************************************************************//*!
|
||||
*
|
||||
* @brief 禁用UART中断.
|
||||
*
|
||||
* @param[in] 指向三个UART其中一个的基址
|
||||
* @param[in] 中断的类型
|
||||
*
|
||||
* @return none
|
||||
*
|
||||
*****************************************************************************/
|
||||
void UART_DisableInterrupt(UART_Type *pUART, UART_InterruptType InterruptType)
|
||||
{
|
||||
/* 通道合法性检查 */
|
||||
ASSERT((pUART == UART0) || (pUART == UART1) || (pUART == UART2));
|
||||
|
||||
|
||||
if (InterruptType == UART_TxBuffEmptyInt) //发送中断禁用
|
||||
{
|
||||
pUART->C2 &= (~UART_C2_TIE_MASK);
|
||||
}
|
||||
else if (InterruptType == UART_TxCompleteInt) //传输完成中断禁用
|
||||
{
|
||||
pUART->C2 &= (~UART_C2_TCIE_MASK);
|
||||
}
|
||||
else if (InterruptType == UART_RxBuffFullInt) //接收器中断禁用
|
||||
{
|
||||
pUART->C2 &= (~UART_C2_RIE_MASK);
|
||||
}
|
||||
else if (InterruptType == UART_IdleLineInt) //空闲线中断禁用
|
||||
{
|
||||
pUART->C2 &= (~UART_C2_ILIE_MASK);
|
||||
}
|
||||
else if (InterruptType == UART_RxOverrunInt) //过载中断禁用
|
||||
{
|
||||
pUART->C3 &= (~UART_C3_ORIE_MASK);
|
||||
}
|
||||
else if (InterruptType == UART_NoiseErrorInt) //噪声错误中断禁用
|
||||
{
|
||||
pUART->C3 &= (~UART_C3_NEIE_MASK);
|
||||
}
|
||||
else if (InterruptType == UART_FramingErrorInt) //帧错误中断禁用
|
||||
{
|
||||
pUART->C3 &= (~UART_C3_FEIE_MASK);
|
||||
}
|
||||
else if (InterruptType == UART_ParityErrorInt) //奇偶校验中断禁用
|
||||
{
|
||||
pUART->C3 &= (~UART_C3_FEIE_MASK);
|
||||
}
|
||||
else
|
||||
{
|
||||
//其他暂不支持类型的中断
|
||||
}
|
||||
}
|
||||
|
||||
|
||||
/*****************************************************************************//*!
|
||||
*
|
||||
* @brief 从两个状态寄存器获取UART状态
|
||||
*
|
||||
* @param[in] pUART 指向三个UART其中一个的基址
|
||||
*
|
||||
* @return 16位的状态
|
||||
*
|
||||
*****************************************************************************/
|
||||
uint16_t UART_GetFlags(UART_Type *pUART)
|
||||
{
|
||||
uint16_t u16StatusFlags = 0;//先清空标志位
|
||||
|
||||
u16StatusFlags = pUART->S2; //将状态寄存器 2 的值赋给标志参数
|
||||
u16StatusFlags = (u16StatusFlags<<8)| pUART->S1; //两个状态寄存器拼接赋给标志参数
|
||||
|
||||
return u16StatusFlags;//返回标志参数的值
|
||||
}
|
||||
|
||||
/*****************************************************************************//*!
|
||||
*
|
||||
* @brief 检查特定的位是否置位.
|
||||
*
|
||||
* @param[in] pUART 指向三个UART其中一个的基址
|
||||
* @param[in] FlagType 位的类型
|
||||
*
|
||||
* @return
|
||||
* 1, 标志置位
|
||||
* 0, 标志清零
|
||||
*
|
||||
*****************************************************************************/
|
||||
uint8_t UART_CheckFlag(UART_Type *pUART, UART_FlagType FlagType)
|
||||
{
|
||||
uint16_t u16StatusFlags = 0;
|
||||
|
||||
u16StatusFlags = UART_GetFlags(pUART);
|
||||
|
||||
return (u16StatusFlags & (1<<FlagType));
|
||||
}
|
||||
|
||||
/*****************************************************************************//*!
|
||||
*
|
||||
* @brief 用查询模式发送字符串.
|
||||
*
|
||||
* @param[in] pUART 指向三个UART其中一个的基址
|
||||
* @param[in] pSendBuff 字符串首地址
|
||||
* @param[in] u32Length 字符串的长度
|
||||
*
|
||||
* @return none
|
||||
*
|
||||
*****************************************************************************/
|
||||
void UART_SendWait(UART_Type *pUART, uint8_t *pSendBuff, uint32_t u32Length)
|
||||
{
|
||||
uint8_t u8TxChar;
|
||||
uint32_t i;
|
||||
|
||||
for (i = 0; i < u32Length; i++)
|
||||
{
|
||||
u8TxChar = pSendBuff[i];
|
||||
while (!UART_IsTxBuffEmpty(pUART))
|
||||
{
|
||||
#if defined(ENABLE_WDOG)
|
||||
WDOG_Feed();
|
||||
#endif
|
||||
}
|
||||
UART_WriteDataReg(pUART, u8TxChar);
|
||||
}
|
||||
}
|
||||
|
||||
/*****************************************************************************//*!
|
||||
*
|
||||
* @brief 用查询模式接收字符串.
|
||||
*
|
||||
* @param[in] pUART 指向三个UART其中一个的基址
|
||||
* @param[in] pReceiveBuff 定义接收字符串的首地址
|
||||
* @param[in] u32Length 所要接收字符串的长度
|
||||
*
|
||||
* @return none
|
||||
*
|
||||
*****************************************************************************/
|
||||
void UART_ReceiveWait(UART_Type *pUART, uint8_t *pReceiveBuff, uint32_t u32Length)
|
||||
{
|
||||
uint8_t u8RxChar;
|
||||
uint32_t i;
|
||||
|
||||
for (i = 0; i < u32Length; i++)
|
||||
{
|
||||
while (!UART_IsRxBuffFull(pUART))
|
||||
{
|
||||
#if defined(ENABLE_WDOG)
|
||||
WDOG_Feed();
|
||||
#endif
|
||||
}
|
||||
u8RxChar = UART_ReadDataReg(pUART);
|
||||
pReceiveBuff[i] = u8RxChar;
|
||||
}
|
||||
}
|
||||
|
||||
/*****************************************************************************//*!
|
||||
*
|
||||
* @brief 等待发送完成.
|
||||
*
|
||||
* @param[in] pUART 指向三个UART其中一个的基址
|
||||
*
|
||||
* @return none
|
||||
*
|
||||
*****************************************************************************/
|
||||
void UART_WaitTxComplete(UART_Type *pUART)
|
||||
{
|
||||
while (!UART_IsTxComplete(pUART));//一直等待直到发送完成
|
||||
}
|
||||
|
||||
/*****************************************************************************//*!
|
||||
*
|
||||
* @brief 设置UART模块的中断回调函数.
|
||||
*
|
||||
* @param[in] pfnCallback 回调函数的地址
|
||||
*
|
||||
* @return none
|
||||
*
|
||||
*****************************************************************************/
|
||||
void UART_SetCallback(UART_CallbackType pfnCallback)
|
||||
{
|
||||
UART_Callback = pfnCallback;
|
||||
}
|
||||
|
||||
|
||||
/*! @} */
|
||||
|
||||
|
||||
/*****************************************************************************//*!
|
||||
*
|
||||
* @brief uart0 中断服务函数.
|
||||
*
|
||||
* @param none
|
||||
*
|
||||
* @return none
|
||||
*
|
||||
*****************************************************************************/
|
||||
void UART0_Isr(void)
|
||||
{
|
||||
UART_Callback(UART0);
|
||||
}
|
||||
|
||||
|
||||
#if defined(CPU_NV32)
|
||||
/*****************************************************************************//*!
|
||||
*
|
||||
* @brief uart0 中断服务函数.
|
||||
*
|
||||
* @param none
|
||||
*
|
||||
* @return none
|
||||
*
|
||||
*****************************************************************************/
|
||||
void UART1_Isr(void)
|
||||
{
|
||||
UART_Callback(UART1);
|
||||
}
|
||||
/*****************************************************************************//*!
|
||||
*
|
||||
* @brief uart0 中断服务函数.
|
||||
*
|
||||
* @param none
|
||||
*
|
||||
* @return none
|
||||
*
|
||||
*****************************************************************************/
|
||||
void UART2_Isr(void)
|
||||
{
|
||||
UART_Callback(UART2);
|
||||
}
|
||||
|
||||
|
||||
#endif
|
||||
|
||||
|
||||
|
||||
Reference in New Issue
Block a user